BGKND - 815 INORGANIC ACID FLUX

  • MSDS: BGKND
  • Manufacturer: KESTER SOLDER
  • Product Name: 815 INORGANIC ACID FLUX
  • National Stock Number: 3439-01-074-1018
Product Identification

Product ID:815 INORGANIC ACID FLUX
MSDS Date:01/01/1987
FSC:3439
NIIN:01-074-1018
MSDS Number: BGKND

Responsible Party
KESTER SOLDER
4201 WRIGHTWOOD AVENUE
CHICAGO, IL 60639-2022
US

Cage: GO345

Contractor
KESTER SOLDER DIVISION OF LITTON SYSTEMS, INC.
DES PLAINES, IL 60018 US

Telephone: 847-297-1600

Cage: 75297

Ingredients

ZINC CHLORIDE (SARA III)

CAS: 7646-85-7

RTECS: ZH1400000

Fraction By Weight: 34%.

OSHA PEL 1 MG/M3/2 STEL

ACGIH TLV: 1 MG/M3/2STEL FUME93

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)

CAS: 7647-01-0

RTECS: MW4025000

Fraction By Weight: 9%.

OSHA PEL C 5 PPM

ACGIH TLV: C 5 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE,SKIN: IRRITATION, BURNS.
INGESTION: IRRITATION, BURNS, PERF MOUTH, GI TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE,SKN:IRRT,BURNS.INHL;INGEST:IRRT, BURNS,
PERF MOUTH,GI TRACT.

First Aid

First Aid:EYE:FLUSH 15 MIN W/AMPLE WATER.SKN:WASH SOAP &
WATER,INHL:REMOVE TO FRESH AIR.GIVE ART RESP OR O2 AS REQD.
INGEST:GIVE AMPLE MILK OR WATER IF CONSC. DO NOT INDUCE
VOMIT.NOTHING BY MOUTH IF UNCONSC. CA LL PHYSICIAN ALL CASES.

Fire Fighting

Extinguishing Media:WATER, CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA AS REQD
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE EQUIP AS PRESCRIBED. CONFINE
SPILL & NEUTRALIZE-W/LIME OR SODA ASH. COLLECT RESIDUE WITH
ABSORBENT, WASH DOWN SPILL AREA TO SEWER.

Handling

Handling and Storage Precautions:KEEP CONTR CLOSED. AVOID EYE, SKN
CONTACT, DO NOT INHALE FUMES WHILE SOLDERING.
Other Precautions:NONE GIVEN.

Exposure Controls

Respiratory Protection:AS REQD
Ventilation:LOCAL PREFERRED
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES
Other Protective Equipment:RUBBER APRON, SLEEVING, IF CONTACT POSSIBLE
Work Hygienic Practices:WASH HANDS AFTER USE.
Supplemental Safety and Health
MSDS DTD 14AUG81.

Chemical Properties

HCC:C3
Boiling Pt:B.P. Text:210F,99C
Vapor Pres:24 MM HG
Vapor Density:<1(AIR=1)
Spec Gravity:1.375(WATER=1)
Evaporation Rate & Reference:1
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR,LIGHT YELLOW LIQUID, MILD ODOR.
Percent Volatiles by Volume:59

Stability

Stability Indicator/Materials to Avoid:YES
ISIDIZERS, ALKALINE MATERIALS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:ZINC OXIDE

Disposal

Waste Disposal Methods:LANDFILL IAW ALL LAWS & REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.